Half-Length 80-Meter Vertical Monopoles:
As a reference, the following pages provide descriptions of the antenna models reported. The descriptions involve a conversion of the file from the ELNEC-MININEC form used in the modeling to the EZNEC-NEC format in which they can be downloaded as text files. However, each file should be easily translatable into a form sufficient for antenna construction under any common antenna modeling program. For ease of reading, antenna descriptions are not split across pages. Numbering categories refer to chapters in the preceding report.
2. Baseline Data: Full-Size and Capacity-Hat Verticals
2.1 Full-size vertical monopoles:
35V10
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 65.970 G 0.000, 0.000, 0.000 1.00E+00 60
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 60 1 / 99.17 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35V15
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 65.900 G 0.000, 0.000, 0.000 1.50E+00 60
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 60 1 / 99.17 ( 1 /100.00) 1.000 0.000 I
No transmission lines specified
Ground type is Perfect
35V20
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 65.800 G 0.000, 0.000, 0.000 2.00E+00 60
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 60 1 / 99.17 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
2.2 Short (37.5') 80-meter vertical monopoles
35VS10
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VS15
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VS20
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
2.3 Capacity Hat Monopoles: Marconi
35VC10
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 -19.000, 0.000, 37.500 W3E2 0.000, 0.000, 37.500 1.00E+00 20
3 19.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 1.00E+00 20
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VC15
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 -19.000, 0.000, 37.500 W3E2 0.000, 0.000, 37.500 1.50E+00 20
3 19.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 1.50E+00 20
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VC20
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
2 -19.050, 0.000, 37.500 W3E2 0.000, 0.000, 37.500 2.00E+00 20
3 19.050, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 2.00E+00 20
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
2.4 Capacity Hat Monopoles: 4-wire
35VC10A
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 -15.800, 0.000, 37.500 W3E2 0.000, 0.000, 37.500 # 12 10
3 15.800, 0.000, 37.500 W4E2 0.000, 0.000, 37.500 # 12 10
4 0.000, 15.800, 37.500 W5E2 0.000, 0.000, 37.500 # 12 10
5 0.000,-15.800, 37.500 W1E1 0.000, 0.000, 37.500 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VC15A
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 -16.800, 0.000, 37.500 W3E2 0.000, 0.000, 37.500 # 12 10
3 16.800, 0.000, 37.500 W4E2 0.000, 0.000, 37.500 # 12 10
4 0.000, 16.800, 37.500 W5E2 0.000, 0.000, 37.500 # 12 10
5 0.000,-16.800, 37.500 W1E1 0.000, 0.000, 37.500 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VC20A
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
2 -17.600, 0.000, 37.500 W3E2 0.000, 0.000, 37.500 # 12 10
3 17.600, 0.000, 37.500 W4E2 0.000, 0.000, 37.500 # 12 10
4 0.000, 17.600, 37.500 W5E2 0.000, 0.000, 37.500 # 12 10
5 0.000,-17.600, 37.500 W1E1 0.000, 0.000, 37.500 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
3. Base-Loading: Lumped-Constant and Linear Loading
3.1 Lumped-constant base loading: lossless loads
35BL10
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
--------------- LOADS ---------------
Load Wire Wire #/Pct From End 1 R (Ohms) X(Ohms)
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 0.000 287.000
No transmission lines specified
Ground type is Perfect
35BL15
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
--------------- LOADS ---------------
Load Wire Wire #/Pct From End 1 R (Ohms) X(Ohms)
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 0.000 266.000
No transmission lines specified
Ground type is Perfect
35BL20
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
--------------- LOADS ---------------
Load Wire Wire #/Pct From End 1 R (Ohms) X(Ohms)
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 0.000 250.500
No transmission lines specified
Ground type is Perfect
3.2 Lumped-constant base loading: load Q = 300
35BL10A
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
--------------- LOADS ---------------
Load Wire Wire #/Pct From End 1 R (Ohms) X(Ohms)
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 0.960 287.000
No transmission lines specified
Ground type is Perfect
35BL15A
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
--------------- LOADS ---------------
Load Wire Wire #/Pct From End 1 R (Ohms) X(Ohms)
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 0.890 266.000
No transmission lines specified
Ground type is Perfect
35BL20A
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
--------------- LOADS ---------------
Load Wire Wire #/Pct From End 1 R (Ohms) X(Ohms)
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 0.840 250.500
No transmission lines specified
Ground type is Perfect
3.3 Linear base loading
35LL1015
Frequency = 3.6 MHz.
Wire Loss: Copper -- Resistivity = 1.74E-08 ohm-m, Rel. Perm. = 1
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 W3E1 0.000, 0.000, 13.050 1.00E+00 25
2 W7E2 0.000, 0.000, 13.000 G 0.000, 0.000, 0.000 # 12 20
3 W1E2 0.000, 0.000, 13.050 W4E1 1.500, 0.000, 13.050 # 12 2
4 W3E2 1.500, 0.000, 13.050 W5E1 1.500, 0.200, 0.500 # 12 20
5 W4E2 1.500, 0.200, 0.500 W6E1 -1.500, 0.200, 0.500 # 12 4
6 W5E2 -1.500, 0.200, 0.500 W7E1 -1.500, 0.000, 13.000 # 12 20
7 W6E2 -1.500, 0.000, 13.000 W2E1 0.000, 0.000, 13.000 # 12 2
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 20 2 / 97.50 ( 2 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35LL1515
Frequency = 3.6 MHz.
Wire Loss: Copper -- Resistivity = 1.74E-08 ohm-m, Rel. Perm. = 1
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 W3E1 0.000, 0.000, 11.950 1.50E+00 25
2 W7E2 0.000, 0.000, 11.900 G 0.000, 0.000, 0.000 # 12 20
3 W1E2 0.000, 0.000, 11.950 W4E1 1.500, 0.000, 11.950 # 12 2
4 W3E2 1.500, 0.000, 11.950 W5E1 1.500, 0.200, 0.500 # 12 20
5 W4E2 1.500, 0.200, 0.500 W6E1 -1.500, 0.200, 0.500 # 12 4
6 W5E2 -1.500, 0.200, 0.500 W7E1 -1.500, 0.000, 11.900 # 12 20
7 W6E2 -1.500, 0.000, 11.900 W2E1 0.000, 0.000, 11.900 # 12 2
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 20 2 / 97.50 ( 2 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35LL2015
Frequency = 3.6 MHz.
Wire Loss: Copper -- Resistivity = 1.74E-08 ohm-m, Rel. Perm. = 1
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 W3E1 0.000, 0.000, 11.150 2.00E+00 25
2 W7E2 0.000, 0.000, 11.100 G 0.000, 0.000, 0.000 # 12 20
3 W1E2 0.000, 0.000, 11.150 W4E1 1.500, 0.000, 11.150 # 12 2
4 W3E2 1.500, 0.000, 11.150 W5E1 1.500, 0.200, 0.500 # 12 20
5 W4E2 1.500, 0.200, 0.500 W6E1 -1.500, 0.200, 0.500 # 12 4
6 W5E2 -1.500, 0.200, 0.500 W7E1 -1.500, 0.000, 11.100 # 12 20
7 W6E2 -1.500, 0.000, 11.100 W2E1 0.000, 0.000, 11.100 # 12 2
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 20 2 / 97.50 ( 2 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
4. Top (Element-Extension) Loading: Linear, Zig-Zag, and Helical Loading
4.1 Linear loading
35LH1030
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 W3E1 0.000, 0.000, 19.900 1.00E+00 30
2 W7E2 0.000, 0.000, 19.850 G 0.000, 0.000, 0.000 1.00E+00 25
3 W1E2 0.000, 0.000, 19.900 W4E1 1.500, 0.000, 20.050 # 12 3
4 W3E2 1.500, 0.000, 20.050 W5E1 3.000, 0.100, 37.500 # 12 25
5 W4E2 3.000, 0.100, 37.500 W6E1 -3.000, 0.100, 37.500 # 12 8
6 W5E2 -3.000, 0.100, 37.500 W7E1 -1.500, 0.000, 20.000 # 12 25
7 W6E2 -1.500, 0.000, 20.000 W2E1 0.000, 0.000, 19.850 # 12 3
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 25 2 / 98.00 ( 2 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35LH1530
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 W3E1 0.000, 0.000, 19.900 1.50E+00 30
2 W7E2 0.000, 0.000, 19.850 G 0.000, 0.000, 0.000 1.50E+00 25
3 W1E2 0.000, 0.000, 19.900 W4E1 1.250, 0.000, 20.050 # 12 3
4 W3E2 1.250, 0.000, 20.050 W5E1 3.000, 0.100, 37.500 # 12 25
5 W4E2 3.000, 0.100, 37.500 W6E1 -3.000, 0.100, 37.500 # 12 8
6 W5E2 -3.000, 0.100, 37.500 W7E1 -1.250, 0.000, 20.000 # 12 25
7 W6E2 -1.250, 0.000, 20.000 W2E1 0.000, 0.000, 19.850 # 12 3
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 25 2 / 98.00 ( 2 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35LH2030
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 0.000, 0.000, 37.500 W3E1 0.000, 0.000, 19.900 2.00E+00 30
2 W7E2 0.000, 0.000, 19.850 G 0.000, 0.000, 0.000 2.00E+00 25
3 W1E2 0.000, 0.000, 19.900 W4E1 1.000, 0.000, 20.050 # 12 3
4 W3E2 1.000, 0.000, 20.050 W5E1 3.000, 0.100, 37.500 # 12 25
5 W4E2 3.000, 0.100, 37.500 W6E1 -3.000, 0.100, 37.500 # 12 8
6 W5E2 -3.000, 0.100, 37.500 W7E1 -1.000, 0.000, 20.000 # 12 25
7 W6E2 -1.000, 0.000, 20.000 W2E1 0.000, 0.000, 19.850 # 12 3
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 25 2 / 98.00 ( 2 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
5.2 "Zig-Zag" loading
35VT1010
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 W3E2 1.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 1.000, 0.000, 20.950 W2E1 1.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 1.000, 20.950 W3E1 1.000, 0.000, 20.950 # 12 4
5 W6E2 0.000, 1.000, 37.500 W4E1 0.000, 1.000, 20.950 # 12 10
6 W7E2 -1.000, 0.000, 37.500 W5E1 0.000, 1.000, 37.500 # 12 4
7 W8E2 -1.000, 0.000, 20.950 W6E1 -1.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -1.000, 20.950 W7E1 -1.000, 0.000, 20.950 # 12 4
9 0.000, -1.000, 37.500 W8E1 0.000, -1.000, 20.950 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT1510
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 W3E2 1.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 1.000, 0.000, 20.600 W2E1 1.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 1.000, 20.600 W3E1 1.000, 0.000, 20.600 # 12 4
5 W6E2 0.000, 1.000, 37.500 W4E1 0.000, 1.000, 20.600 # 12 10
6 W7E2 -1.000, 0.000, 37.500 W5E1 0.000, 1.000, 37.500 # 12 4
7 W8E2 -1.000, 0.000, 20.600 W6E1 -1.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -1.000, 20.600 W7E1 -1.000, 0.000, 20.600 # 12 4
9 0.000, -1.000, 37.500 W8E1 0.000, -1.000, 20.600 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT2010
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
2 W3E2 1.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 1.000, 0.000, 20.400 W2E1 1.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 1.000, 20.400 W3E1 1.000, 0.000, 20.400 # 12 4
5 W6E2 0.000, 1.000, 37.500 W4E1 0.000, 1.000, 20.400 # 12 10
6 W7E2 -1.000, 0.000, 37.500 W5E1 0.000, 1.000, 37.500 # 12 4
7 W8E2 -1.000, 0.000, 20.400 W6E1 -1.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -1.000, 20.400 W7E1 -1.000, 0.000, 20.400 # 12 4
9 0.000, -1.000, 37.500 W8E1 0.000, -1.000, 20.400 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT1020
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 W3E2 2.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 2.000, 0.000, 24.250 W2E1 2.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 2.000, 24.250 W3E1 2.000, 0.000, 24.250 # 12 4
5 W6E2 0.000, 2.000, 37.500 W4E1 0.000, 2.000, 24.250 # 12 10
6 W7E2 -2.000, 0.000, 37.500 W5E1 0.000, 2.000, 37.500 # 12 4
7 W8E2 -2.000, 0.000, 24.250 W6E1 -2.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -2.000, 24.250 W7E1 -2.000, 0.000, 24.250 # 12 4
9 0.000, -2.000, 37.500 W8E1 0.000, -2.000, 24.250 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT1520
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 W3E2 2.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 2.000, 0.000, 23.750 W2E1 2.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 2.000, 23.750 W3E1 2.000, 0.000, 23.750 # 12 4
5 W6E2 0.000, 2.000, 37.500 W4E1 0.000, 2.000, 23.750 # 12 10
6 W7E2 -2.000, 0.000, 37.500 W5E1 0.000, 2.000, 37.500 # 12 4
7 W8E2 -2.000, 0.000, 23.750 W6E1 -2.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -2.000, 23.750 W7E1 -2.000, 0.000, 23.750 # 12 4
9 0.000, -2.000, 37.500 W8E1 0.000, -2.000, 23.750 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT2020
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
2 W3E2 2.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 2.000, 0.000, 23.400 W2E1 2.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 2.000, 23.400 W3E1 2.000, 0.000, 23.400 # 12 4
5 W6E2 0.000, 2.000, 37.500 W4E1 0.000, 2.000, 23.400 # 12 10
6 W7E2 -2.000, 0.000, 37.500 W5E1 0.000, 2.000, 37.500 # 12 4
7 W8E2 -2.000, 0.000, 23.400 W6E1 -2.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -2.000, 23.400 W7E1 -2.000, 0.000, 23.400 # 12 4
9 0.000, -2.000, 37.500 W8E1 0.000, -2.000, 23.400 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT1030
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 3.000, 0.000, 26.800 W2E1 3.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 3.000, 26.800 W3E1 3.000, 0.000, 26.800 # 12 4
5 W6E2 0.000, 3.000, 37.500 W4E1 0.000, 3.000, 26.800 # 12 10
6 W7E2 -3.000, 0.000, 37.500 W5E1 0.000, 3.000, 37.500 # 12 4
7 W8E2 -3.000, 0.000, 26.800 W6E1 -3.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -3.000, 26.800 W7E1 -3.000, 0.000, 26.800 # 12 4
9 0.000, -3.000, 37.500 W8E1 0.000, -3.000, 26.800 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT1530
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 3.000, 0.000, 26.240 W2E1 3.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 3.000, 26.240 W3E1 3.000, 0.000, 26.240 # 12 4
5 W6E2 0.000, 3.000, 37.500 W4E1 0.000, 3.000, 26.240 # 12 10
6 W7E2 -3.000, 0.000, 37.500 W5E1 0.000, 3.000, 37.500 # 12 4
7 W8E2 -3.000, 0.000, 26.240 W6E1 -3.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -3.000, 26.240 W7E1 -3.000, 0.000, 26.240 # 12 4
9 0.000, -3.000, 37.500 W8E1 0.000, -3.000, 26.240 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VT2030
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 # 12 3
3 W4E2 3.000, 0.000, 25.880 W2E1 3.000, 0.000, 37.500 # 12 10
4 W5E2 0.000, 3.000, 25.880 W3E1 3.000, 0.000, 25.880 # 12 4
5 W6E2 0.000, 3.000, 37.500 W4E1 0.000, 3.000, 25.880 # 12 10
6 W7E2 -3.000, 0.000, 37.500 W5E1 0.000, 3.000, 37.500 # 12 4
7 W8E2 -3.000, 0.000, 25.880 W6E1 -3.000, 0.000, 37.500 # 12 10
8 W9E2 0.000, -3.000, 25.880 W7E1 -3.000, 0.000, 25.880 # 12 4
9 0.000, -3.000, 37.500 W8E1 0.000, -3.000, 25.880 # 12 10
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
4.3 Helical loading
35VZ1025
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 2.50E-01 3
3 W4E2 0.000, 3.000, 37.500 W2E1 3.000, 0.000, 37.500 2.50E-01 4
4 W5E2 -3.000, 0.000, 37.500 W3E1 0.000, 3.000, 37.500 2.50E-01 4
5 W6E2 0.000, -3.000, 37.500 W4E1 -3.000, 0.000, 37.500 2.50E-01 4
6 W7E2 3.000, 0.000, 37.000 W5E1 0.000, -3.000, 37.500 2.50E-01 4
7 W8E2 0.000, 3.000, 37.000 W6E1 3.000, 0.000, 37.000 2.50E-01 4
8 W9E2 -3.000, 0.000, 37.000 W7E1 0.000, 3.000, 37.000 2.50E-01 4
9 W10E2 0.000, -3.000, 37.000 W8E1 -3.000, 0.000, 37.000 2.50E-01 4
10 W11E2 3.000, 0.000, 36.500 W9E1 0.000, -3.000, 37.000 2.50E-01 4
11 W12E2 0.000, 3.000, 36.500 W10E1 3.000, 0.000, 36.500 2.50E-01 4
12 W13E2 -3.000, 0.000, 36.500 W11E1 0.000, 3.000, 36.500 2.50E-01 4
13 W14E2 0.000, -3.000, 36.500 W12E1 -3.000, 0.000, 36.500 2.50E-01 4
14 W15E2 3.000, 0.000, 36.000 W13E1 0.000, -3.000, 36.500 2.50E-01 4
15 W16E2 0.000, 3.000, 36.000 W14E1 3.000, 0.000, 36.000 2.50E-01 4
16 W17E2 -3.000, 0.000, 36.000 W15E1 0.000, 3.000, 36.000 2.50E-01 4
17 W18E2 0.000, -3.000, 36.000 W16E1 -3.000, 0.000, 36.000 2.50E-01 4
18 2.800, -0.200, 35.500 W17E1 0.000, -3.000, 36.000 2.50E-01 4
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VZ1525
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 2.50E-01 3
3 W4E2 0.000, 3.000, 37.500 W2E1 3.000, 0.000, 37.500 2.50E-01 4
4 W5E2 -3.000, 0.000, 37.500 W3E1 0.000, 3.000, 37.500 2.50E-01 4
5 W6E2 0.000, -3.000, 37.500 W4E1 -3.000, 0.000, 37.500 2.50E-01 4
6 W7E2 3.000, 0.000, 37.000 W5E1 0.000, -3.000, 37.500 2.50E-01 4
7 W8E2 0.000, 3.000, 37.000 W6E1 3.000, 0.000, 37.000 2.50E-01 4
8 W9E2 -3.000, 0.000, 37.000 W7E1 0.000, 3.000, 37.000 2.50E-01 4
9 W10E2 0.000, -3.000, 37.000 W8E1 -3.000, 0.000, 37.000 2.50E-01 4
10 W11E2 3.000, 0.000, 36.500 W9E1 0.000, -3.000, 37.000 2.50E-01 4
11 W12E2 0.000, 3.000, 36.500 W10E1 3.000, 0.000, 36.500 2.50E-01 4
12 W13E2 -3.000, 0.000, 36.500 W11E1 0.000, 3.000, 36.500 2.50E-01 4
13 W14E2 0.000, -3.000, 36.500 W12E1 -3.000, 0.000, 36.500 2.50E-01 4
14 W15E2 3.000, 0.000, 36.000 W13E1 0.000, -3.000, 36.500 2.50E-01 4
15 W16E2 0.000, 3.000, 36.000 W14E1 3.000, 0.000, 36.000 2.50E-01 4
16 W17E2 -3.000, 0.000, 36.000 W15E1 0.000, 3.000, 36.000 2.50E-01 4
17 W18E2 0.000, -3.000, 36.000 W16E1 -3.000, 0.000, 36.000 2.50E-01 4
18 W19E2 3.000, 0.000, 35.500 W17E1 0.000, -3.000, 36.000 2.50E-01 4
19 2.200, 0.800, 35.500 W18E1 3.000, 0.000, 35.500 2.50E-01 2
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VZ2025
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 2.00E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 2.50E-01 3
3 W4E2 0.000, 3.000, 37.500 W2E1 3.000, 0.000, 37.500 2.50E-01 4
4 W5E2 -3.000, 0.000, 37.500 W3E1 0.000, 3.000, 37.500 2.50E-01 4
5 W6E2 0.000, -3.000, 37.500 W4E1 -3.000, 0.000, 37.500 2.50E-01 4
6 W7E2 3.000, 0.000, 37.000 W5E1 0.000, -3.000, 37.500 2.50E-01 4
7 W8E2 0.000, 3.000, 37.000 W6E1 3.000, 0.000, 37.000 2.50E-01 4
8 W9E2 -3.000, 0.000, 37.000 W7E1 0.000, 3.000, 37.000 2.50E-01 4
9 W10E2 0.000, -3.000, 37.000 W8E1 -3.000, 0.000, 37.000 2.50E-01 4
10 W11E2 3.000, 0.000, 36.500 W9E1 0.000, -3.000, 37.000 2.50E-01 4
11 W12E2 0.000, 3.000, 36.500 W10E1 3.000, 0.000, 36.500 2.50E-01 4
12 W13E2 -3.000, 0.000, 36.500 W11E1 0.000, 3.000, 36.500 2.50E-01 4
13 W14E2 0.000, -3.000, 36.500 W12E1 -3.000, 0.000, 36.500 2.50E-01 4
14 W15E2 3.000, 0.000, 36.000 W13E1 0.000, -3.000, 36.500 2.50E-01 4
15 W16E2 0.000, 3.000, 36.000 W14E1 3.000, 0.000, 36.000 2.50E-01 4
16 W17E2 -3.000, 0.000, 36.000 W15E1 0.000, 3.000, 36.000 2.50E-01 4
17 W18E2 0.000, -3.000, 36.000 W16E1 -3.000, 0.000, 36.000 2.50E-01 4
18 W19E2 3.000, 0.000, 35.500 W17E1 0.000, -3.000, 36.000 2.50E-01 4
19 1.500, 1.500, 35.500 W18E1 3.000, 0.000, 35.500 2.50E-01 2
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
35VH1525
Frequency = 3.6 MHz.
Wire Loss: Zero
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.50E+00 40
2 W3E2 3.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 2.50E-01 3
3 W4E2 0.000, 3.000, 37.375 W2E1 3.000, 0.000, 37.500 2.50E-01 4
4 W5E2 -3.000, 0.000, 37.250 W3E1 0.000, 3.000, 37.375 2.50E-01 4
5 W6E2 0.000, -3.000, 37.125 W4E1 -3.000, 0.000, 37.250 2.50E-01 4
6 W7E2 3.000, 0.000, 37.000 W5E1 0.000, -3.000, 37.125 2.50E-01 4
7 W8E2 0.000, 3.000, 36.875 W6E1 3.000, 0.000, 37.000 2.50E-01 4
8 W9E2 -3.000, 0.000, 36.750 W7E1 0.000, 3.000, 36.875 2.50E-01 4
9 W10E2 0.000, -3.000, 36.625 W8E1 -3.000, 0.000, 36.750 2.50E-01 4
10 W11E2 3.000, 0.000, 36.500 W9E1 0.000, -3.000, 36.625 2.50E-01 4
11 W12E2 0.000, 3.000, 36.375 W10E1 3.000, 0.000, 36.500 2.50E-01 4
12 W13E2 -3.000, 0.000, 36.250 W11E1 0.000, 3.000, 36.375 2.50E-01 4
13 W14E2 0.000, -3.000, 36.125 W12E1 -3.000, 0.000, 36.250 2.50E-01 4
14 W15E2 3.000, 0.000, 36.000 W13E1 0.000, -3.000, 36.125 2.50E-01 4
15 W16E2 0.000, 3.000, 35.875 W14E1 3.000, 0.000, 36.000 2.50E-01 4
16 W17E2 -3.000, 0.000, 35.750 W15E1 0.000, 3.000, 35.875 2.50E-01 4
17 W18E2 0.000, -3.000, 35.625 W16E1 -3.000, 0.000, 35.750 2.50E-01 4
18 W19E2 3.000, 0.000, 35.500 W17E1 0.000, -3.000, 35.625 2.50E-01 4
19 2.000, 1.000, 35.420 W18E1 3.000, 0.000, 35.500 2.50E-01 2
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
5. Spiral Top-Hat Loading
35HC1025
Frequency = 3.6 MHz.
Wire Loss: Aluminum -- Resistivity = 4E-08 ohm-m, Rel. Perm. = 1
--------------- WIRES ---------------
Wire Conn. --- End 1 (x,y,z : ft) Conn. --- End 2 (x,y,z : ft) Dia(in) Segs
1 W2E2 0.000, 0.000, 37.500 G 0.000, 0.000, 0.000 1.00E+00 40
2 W3E2 0.000, 1.000, 37.500 W8E2 0.000, 0.000, 37.500 2.50E-01 2
3 W4E2 2.000, 1.000, 37.500 W2E1 0.000, 1.000, 37.500 2.50E-01 4
4 W5E2 2.000, -3.000, 37.500 W3E1 2.000, 1.000, 37.500 2.50E-01 8
5 W6E2 -4.000, -3.000, 37.500 W4E1 2.000, -3.000, 37.500 2.50E-01 12
6 W7E2 -4.000, 5.000, 37.500 W5E1 -4.000, -3.000, 37.500 2.50E-01 24
7 2.200, 5.000, 37.500 W6E1 -4.000, 5.000, 37.500 2.50E-01 16
8 W9E2 -1.000, 0.000, 37.500 W14E2 0.000, 0.000, 37.500 2.50E-01 2
9 W10E2 -1.000, 2.000, 37.500 W8E1 -1.000, 0.000, 37.500 2.50E-01 4
10 W11E2 3.000, 2.000, 37.500 W9E1 -1.000, 2.000, 37.500 2.50E-01 8
11 W12E2 3.000, -4.000, 37.500 W10E1 3.000, 2.000, 37.500 2.50E-01 12
12 W13E2 -5.000, -4.000, 37.500 W11E1 3.000, -4.000, 37.500 2.50E-01 24
13 -5.000, 2.200, 37.500 W12E1 -5.000, -4.000, 37.500 2.50E-01 16
14 W15E2 0.000, -1.000, 37.500 W20E2 0.000, 0.000, 37.500 2.50E-01 2
15 W16E2 -2.000, -1.000, 37.500 W14E1 0.000, -1.000, 37.500 2.50E-01 4
16 W17E2 -2.000, 3.000, 37.500 W15E1 -2.000, -1.000, 37.500 2.50E-01 8
17 W18E2 4.000, 3.000, 37.500 W16E1 -2.000, 3.000, 37.500 2.50E-01 12
18 W19E2 4.000, -5.000, 37.500 W17E1 4.000, 3.000, 37.500 2.50E-01 24
19 -2.200, -5.000, 37.500 W18E1 4.000, -5.000, 37.500 2.50E-01 16
20 W21E2 1.000, 0.000, 37.500 W1E1 0.000, 0.000, 37.500 2.50E-01 2
21 W22E2 1.000, -2.000, 37.500 W20E1 1.000, 0.000, 37.500 2.50E-01 4
22 W23E2 -3.000, -2.000, 37.500 W21E1 1.000, -2.000, 37.500 2.50E-01 8
23 W24E2 -3.000, 4.000, 37.500 W22E1 -3.000, -2.000, 37.500 2.50E-01 12
24 W25E2 5.000, 4.000, 37.500 W23E1 -3.000, 4.000, 37.500 2.50E-01 24
25 5.000, -2.200, 37.500 W24E1 5.000, 4.000, 37.500 2.50E-01 16
-------------- SOURCES --------------
Source Wire Wire #/Pct From End 1 Ampl.(V, A) Phase(Deg.) Type
Seg. Actual (Specified)
1 40 1 / 98.75 ( 1 /100.00) 1.000 0.000 I
No loads specified
No transmission lines specified
Ground type is Perfect
Updated 5-12-97. © L. B. Cebik, W4RNL. Data may be used for personal purposes, but may not be reproduced for publication in print or any other medium without permission of the author.
Return to Index
Go to Amateur Radio Page